New 110V 220W Lab Homogenizer Disperser Mixer Laboratory Emulsification Agitator

Description

Structural features of FSH-2A adjustable high-speed homogenizer:   1. Adopt high-speed internal suction homogenization structure (inner cutter), which can be used to homogenize, emulsify and extract trace organic compounds, lipid solutes and soluble organic solvents between two immiscible liquids.   2. Various animal and plant tissues can be homogeneously mixed.   3. It can break the cell membrane, separate and split DNA strands into small molecules at different speeds.   4. It can be used as a stirrer at low speed, high-speed digital display, intuitive reading.   5. The meter adopts a high-speed thyristor control system, and the Hall element speed measurement adopts advanced electronic circuits. The digital display is clear and easy to use.
New 110V 220W Lab Homogenizer Disperser Mixer Laboratory Emulsification Agitator
New 110V 220W Lab Homogenizer Disperser Mixer Laboratory Emulsification Agitator
Structural features of FSH-2A adjustable high-speed homogenizer:
1. Adopt high-speed internal suction homogenization structure (inner cutter), which can be used to homogenize, emulsify and extract trace organic compounds, lipid solutes and soluble organic solvents between two immiscible liquids.
2. Various animal and plant tissues can be homogeneously mixed.
3. It can break the cell membrane, separate and split DNA strands into small molecules at different speeds.
4. It can be used as a stirrer at low speed, high-speed digital display, intuitive reading.
5. The meter adopts a high-speed thyristor control system, and the Hall element speed measurement adopts advanced electronic circuits. The digital display is clear and easy to use.
Technical parameters of FSH-2A adjustable high-speed homogenizer:
Motor speed: 8000-22000 rpm
Rated power: 220W
Rated voltage: 110V
Rated frequency: 60HZ
Adjustment system: knob
Working head size:
1212G: diameter 12mm, length 120mm
1218G: diameter 18mm, length 120mm
Processing capacity: 5-1000ml
Weight: 7KG
Size: 27*17*40cm
Working mode: alternate 5 minutes
Working method: internal cutting tool
Contact material: stainless steel and polytetrafluoroethylene
Note for FSH-2A adjustable high-speed homogenizer:
The instrument should be placed on a horizontal work surface, and the homogenization knives required for installation must be in place. When turning on the power to test the machine, first use a cup or utensil filled with water to submerge the plum blossom knife head in the water, turn on the power switch, and adjust slowly Turn the speed knob to fast and there is no obvious metal friction sound (if there is metal friction sound, turn off the power, loosen the 6M/M clamping screw of the tool, turn the outer fixing sleeve into place at random, and then tighten it) before it can work.
Cut the plants or microorganisms to be tested into small pieces or pieces, put them in the supplied glassware, clamp them in the middle of the magnet bracket (seven-shaped), loosen the 8M/M fixing screws of the fixed motor base, and slowly align them Move the mouth of the vessel down so that the homogenization head is 2-3mm away from the bottom of the vessel, and then tighten the 8M/M screws.
FSH-2A adjustable high-speed homogenizer instrument maintenance:
After long-term use, the PTFE in the high-speed disperser cutter is a vulnerable part for users to replace.
Note: After each work, remove the knives and rinse them with water to dry.
On Sep 20, 2022 at 23:21:15 PDT, seller added the following information: